About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Company News
Home ProductsBlow Molding Equipment

Zhangjiagang Baisu Machinery Manufacture Co., Ltd.

Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine

    • Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine
    • Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine
    • Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine
    • Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine
  • Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine

    Product Details:

    Place of Origin: ZHANGJIAGANG, JIANGSU
    Brand Name: BAISU / SUNRAY
    Certification: CE / ISO9001
    Model Number: 30L EBM SRB80

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 Set
    Price: USD 48000-50000 / Set
    Packaging Details: Covered with water-proof film, fastened with special container loop and hooks.
    Delivery Time: 60 Days
    Payment Terms: L/C, D/A, D/P, T/T, Western Union, MoneyGram
    Supply Ability: 400 Sets / Year
    Contact Now
    Detailed Product Description
    Machine Type: Blow Molding Equipment Product Range: Plastic Drum, Jerry Can, Container, Pot
    Max Volume: 30L Material: LDPE, HDPE, PP
    Capacity Output: 50-55 Pcs/hour Power Avg.: 26.5KW
    Clamping Force: 260 KN Guarantee Time: 1 Year

    Plastic HDPE 20 Liter Blow Molding Equipment, Jerry Can Making Machine, 20L Plastic Water Container and Water Pot Blow Molding Machine





    1. SRB80 is the accumulating type HDPE blowing machine for 10L, 15L, 20L, 25L & 30L water tanks.


    2. Its output for 5 gallon water drum is 54 Pcs/hour, output for 25L hdpe container is 50 Pcs/hour.


    3. Energy saving, mature hydraulic and electric design, low problem rate to reduce your production cost.





    Machine Model Plastic Blowing Bottle Machine
    Max Product Volume 30 L
    Machine Weight 9.5 Tons
    Machine Size 5.3x3.6x3.8 m
    Screw Diameter 80 mm
    Plasticizing Capacity 100 Kg/hour
    Clamping Force 260 KN
    Platen Size 800x850 mm
    Platen Opening Stroke 400-950 mm
    Max Mould Size 700*1150 mm
    Accumulating Volume 3.5 L
    Max Ejection Weight 2.65 Kg
    Max Product Weight 1.8 Kg
    Max Die Diameter 350 mm
    Total Power 88.5 KW
    Average Energy Consumption 26.5 KW


    Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine

    Click to see more photos of SRB80 Commissioning





    1. Machine Size: 5.3x3.6x3.8 m


    2. Production Area: 10x6.0 m


    3. Minimum Workshop Height: 5.0 m


    4. Air Supply Requirement: 1.2m3/min, 0.8Mpa


    5. Water Supply Requirement: 10 Tons


    6. Machine Power Consumption: 26.5 KW


    7. Production Line Power Consumption: 42 KW


    8. Whole Line Electricity Arrangement: 400 Amps


    9. Minimum Workers Number: 2 Workers



    Extrusion System

    The extrusion system includes gear box, extrusioin motor, inverter, screw, barrel, head and die. The extruder adopts gradient mixing type with high-speed energy saving design. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. The head runner has good design and head matel is processed for higher hardness. The die and core will be made according to your product design and size.

    Clamping Unit
    Clamping unit is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by proximity switches or transducers. Our nether bent arm central clamping structure insures the clamping force bearing to mould in balance, easy for scraps auto-deflashing, also good for mould's lifespan.

    Electric Control
    The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.

    Hydraulic System
    The hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on. Our hydraulic system has been updated with proportion valve and mechanical shuttle valve for action stability and precision. It insures the oil pressure output fast but smooth, action performance is quick but with less impact.

    Water & Air Supply
    The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.4~0.6 Mpa, air consumption is 0.6~0.8 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 9000L/hour.

    Automatic Production
    our machine supports auto-deflashing control system and pneumatic hardware, the scraps can be on-line removed automatically through auto-deflashing mould. Scraps fall down and slide outside of machine through a slide channel. The finished products are pushed out from another side together with platen carriage down action with the guidance of bottle collective shelves. The conveyer system can be equipped to take scraps into crusher, and convey the finished products to leakage tester or packing table. During the producing period, the machine can work automatically without the worker's help.

    Working Flow Arrangement
    The whole producing line totally need 2 workers. Worker No.1 takes charge of material mixing and feeding, he collects the crushed scraps into color mixer, operate the material mixing of new material, crushed material and color master batch. After mixing he carries material into material source tank, the auto-loader will feed material automatically. The other worker takes charge of bottle packing, and take the packaged bottles into storage area.


    Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine


    Plastic HDPE 20 Liter Blow Molding Equipment , Jerry Can Making Machine

    Contact Details
    Zhangjiagang Baisu Machinery Manufacture Co., Ltd.

    Contact Person: Karen Dong

    Send your inquiry directly to us (0 / 3000)