PROFESSIONAL IN EXTRUSION BLOW MOLDING
PROVIDER OF EBM PRODUCTION SOLUTIONS
|Place of Origin:||China, Jiangsu Province|
|Minimum Order Quantity:||1 Set|
|Packaging Details:||Covered with water-proof film, fastened with special container loop and hooks.|
|Delivery Time:||50 Days|
|Payment Terms:||T/T, L/C, Western Union|
|Supply Ability:||200 Sets/ Year|
|Machine Type:||Extrusion Blow Molding||Product Range:||Plastic Bottle|
|Max Volume:||1L||Material:||LDPE, HDPE, PP|
|Machine Size:||2.8x1.65x2.3M||Machine Weight:||3.5T|
|Power:||16.5 KW||Guarantee:||1 Year|
Sport water bottle plastic blow moulding machine SRB50-2
MACHINE MAIN FEATURES
● Sport water bottle plastic blow moulding machine SRB50-2, single station double head EBM.
● Max product volume is 1000ml, used for sport water bottle, plastic jar, liquid soap bottles.
● Its output for 750ml sport water bottle is 275 Pcs/hour, the daily capacity is 6600 bottles.
● High-hardness alloy coating screw driven by SIEMENS motor for plasticizing capacity 50KG.
● Nether bent arm central clamping unit with linear guide rails for platen moving in stability.
● Double cavity head with reasonable runner design and refined surface process technology.
● Updated hydraulic system with proportional hydraulic valve for stable and precise actions.
● Use 2 pneumatic cylinders for head lifting, clean and easy for maintenance and repair.
● Lubrication pump, scraps slide channels, product clamping boards are included.
|Machine Model||EBM SRB50-1|
|Max Product Volume||2L|
|Machine Size||2.8x1.65x2.3 m|
|Machine Weight||3.5 Tons|
|Voltage Suitable||Customer Specified|
|Screw Diameter||50 mm|
|Barrel Heating Power||10.8 KW|
|Extrusion Motor Power||11 KW|
|Plasticizing Capacity||50 KG|
|Platen Size||290x360 mm|
|Opening Stroke||130~380 mm|
|Max Mould Size||320x360 mm|
|Heating Zone No.||2+1|
|Head Heating Power||4.2 KW|
|Total Power||32 KW|
|Average Energy Consumption||16.5 KW|
|Compressed Air Needed||0.6 Mpa / 0.6 m3|
|Cooling Water Needed||2.5 m3/H|
Sport water bottle plastic blow moulding machine SRB50-2 is widely used in sport water bottle making field, detergent bottle field, cosmetic packing field and shampoo bottle field, also used for other small round or square bottles. In normal production, the cycle time is about 27 seconds. Its production capacity is 275 pcs/hour, daily output is 6600 bottles. The key technical points lie in even extrusion speed and multi-head material runner design and process, to make sure the parison extruding speed in each head is equal. Besides EBM machine, we also provide on-line auto deflashing plastic bottle moulds, and auxiliary machines such as auto-loader, color mixer, scraps crusher, water chiller, air compressor, air accumulating tank, leakage tester, in-mold labeling machine and so on. We help customers to get one stop service of manufacturing, exporting and technical supports.
The extrusion system includes gear box, extrusioin motor, inverter, screw, barrel, head and die. The extruder adopts gradient mixing type with high-speed energy saving design. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2. The head runner has good design and head matel is processed for higher hardness. The die and core will be made according to your product design and size.
Clamping unit is composed of front & back platens, clamping seat, carriage seat, mould stroking & clamping hydraulic cylinders, synchronizing mechanism, with the structure of nether crank design. Platen movements open & close, carriage up & down is assisted with linear guide rails & ball bearing sliders to increase action smoothness and position precision. The end positions & slow speed positions are controlled by proximity switches or transducers. Our nether bent arm central clamping structure insures the clamping force bearing to mould in balance, easy for scraps auto-deflashing, also good for mould's lifespan.
The electrical control system is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage stabilized source, air swtiches, mid relays, proximity switches, inverter and motors. The operation panel contains power switch, touch screen, alarm, hot cutter knob, auto cycle button, emergency stop button, action reversion button, extruding speed button.
The hydraulic system is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on. Our hydraulic system has been updated with proportion valve and mechanical shuttle valve for action stability and precision. It insures the oil pressure output fast but smooth, action performance is quick but with less impact.
Water & Air Supply
The pneumatic system contains air cylinder, air valves, air filters, air tubes, fast plugs and so on, for controlling the actions of head inner blowing, blow pin blowing, auto-deflashing, or pushing in & out for some special moulds. The necessary air pressure is 0.4~0.6 Mpa, air consumption is 0.6~0.8 M3/min. The water system contains water distributing blocks, ball valves, tubes, connectors and so on, for chilling the screw & barrel, hard gear box, blowing units and moulds. The necessary water pressure is 0.2~0.4 Mpa, water consumption is 2500L/hour.
our machine supports auto-deflashing control system and pneumatic hardware, the scraps can be on-line removed automatically through auto-deflashing mould. Scraps fall down and slide outside of machine through a slide channel. The finished products are pushed out from another side together with platen carriage down action with the guidance of bottle collective shelves. The conveyer system can be equipped to take scraps into crusher, and convey the finished products to leakage tester or packing table. During the producing period, the machine can work automatically without the worker's help.
Working Flow Arrangement
The whole producing line totally need 2 workers. Worker No.1 takes charge of material mixing and feeding, he collects the crushed scraps into color mixer, operate the material mixing of new material, crushed material and color master batch. After mixing he carries material into material source tank, the auto-loader will feed material automatically. The other worker takes charge of bottle packing, and take the packaged bottles into storage area.
PURCHASE & SERVICE FLOW
1. Get customers' sample or product information to select the suitable blow molding machine model.
2. Communicate and negotiate to customers' detailed requirements and provide solution plan.
3. Confirm payment terms, price discount and make proforma invoice or contract, arrange down payment.
4. Start order production and report to customers the manufacturing progress in every week.
5. Machine is finished for mould test, bring forward commissioning report and arrange tail in works.
6. Invite customers for checking and acceptance,operation training, arrange loading and delivery.
7. Dispatch engineer for installation and commissioning, arrange machines' layout in customer' s site.
8. One year guarantee, after sales services, share our experience and remote technical support.
9. Feedback in time for customer's problem, provide solutions and customer's new project consulation